Chip-based devices and biosensors
incorporate the attachment of biomolecules
at interfaces. The behavior of biomolecules
at the surface and interfaces differs from the
behavior of biomolecules in the bulk solution.
Surface-analysis techniques are therefore
required to characterize these interfaces.
Second harmonic generation (SHG) has been
used to characterize DNA on...
In this research project, particle sorting of
Brownian liquids was explored by sweeping
two noncoherent pairs of parallel optical
standing waves in a translating medium.
Each wave was created by interfering two
coherent beams of light, and the resulting
fringe periods were determined by the angle
of intersection. Adjusting the...
Germanium (Ge) nanowires were grown via
the vapor-liquid-solid growth mechanism
and surface-doped with manganese (Mn).
The nanowires were annealed at 350˚ C for
30 min to promote the Mn diffusion.
Pulsed-laser local electrode atom probe
tomography was used to determine the
concentration and distribution of Mn in the
Ge nanowires....
Numerous studies have been structured to
investigate magnetoelectric multiferroic
materials, which possess simultaneous
ferroelectric and (anti)ferromagnetic
ordering. Bismuth ferrite (BiFeO3), referred
to as BFO, has drawn special attention
because of its unique ability to maintain both
electric and magnetic dipole moments at
room temperature. BFO shows great
potential to revolutionize...
A self-assembled monolayer of an alkene or
alkyne can be applied to a hydrogenpassivated
silicon surface using UV hydrosilylation.
This research shows that
field-induced oxides can be used as a
negative resist to selectively prevent
bromostyrene attachment, providing a
means of nanopatterning organic molecules
on silicon. The negative resist effects...
Pressure-assisted densification was used
by way of a hot press to optimize the
conditions of heat and pressure when
applied to anatase (TiO2). This study
optimized hot-pressing conditions, which
will be helpful when doping TiO2 because it
will allow optimization of bulk anatase for
transparent conductive oxide (TCO)
applications. Lessons...
This paper reports the synthesis of an
azide-functionalized deoxynucleoside as a
precursor for azide-terminated oligonucleotides.
Also reported is the synthesis of an
acetylene-terminated precursor, which can
be used to make a diverse array of
silyl-protected acetylene-terminated small
molecule cores. Both of these precursors
serve as basic building blocks en route...
The need for high-performance, solid-state
H2 gas sensors is one research effort aimed
at enabling the future hydrogen economy.
Improving the gas-sensing properties of
semiconducting oxide materials such as tin
oxide, zinc oxide, etc., necessitates the
control microstructure and composition.
This study compares the effect of
dimensionality with the effect...
Magnetic resonance imaging (MRI) is a
powerful technique used in clinical
medicine and biomedical research to
conduct noninvasive imaging of tissues and
organisms. Chelated gadolinium is often
used as an MRI contrast agent to improve
the spatial resolution of these images.
Recently developed “smart” MRI contrast
agents respond to specific...
This research illustrates the modification of
an iodostyrene layer on a Si(111) surface
using a Sonogashira reaction. This was
accomplished by applying UV irradiation
(254 nm) to a hydrogen-passivated silicon
surface in a solution of iodostyrene in
benzene, followed by a Sonogashira
coupling between the iodine group from
iodostyrene and...